> >>>>Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")

Torude valtsimine

Informatsioon

Brändid

E-hind Hea pakkumine !
Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")
Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")
Eelmine
  • Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")
  • Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")
  • Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")
Järgmine

Piduritoru otsa valtsimise komplekt, DIN F, ø4.75mm (3/16")

D6128

Condor Werkzeug (Saksamaa)

Uus toode

E-hind: 146,73 € koos maksudega

Hind on kehtiv vaid e-poest ostes.

Rohkem infot

  • for flaring according to DIN F
  • incl. Brake Pipe Ratchet Cutter, Brake Service Spanner 10x11 mm and Bending Tool for
    ø 3 mm, 4.75 mm (3/16") and 6 mm pipes
  • small and compact construction, to be applied directly under the vehicle, also in hard-to-reach areas

for ØLength
5737.jpg
Brake Pipe Ratchet Cutter
  • for quick and easy cutting of brake pipes with ø 4.75 mm
  • compact design and ratchet function for use in narrow spaces
  • automatic adjustment of blade contact pressure enables cutting without tiresome adjustment of clamping screw
  • spare blade available under No. 5737-01
4.75 mm
5734.jpg
Pipe Bender
  • for brake and fuel pipes compact design, suitable for application directly on the vehicle
  • smallest bending radius approx. 15 mm
  • for bending up to 90°
  • suitable for aluminium, copper, brass and soft steel pipes
  • for ø: 3 mm (1/8"), 4.75 mm (3/16"), 6 mm (1/4")
140 mm
4085.jpg
Brake Service Spanner, offset, 10x11 mm
  • reinforced jaw for high durability
  • offset
4904.jpg
Flaring Tool for Ø 4.75 mm according to DIN
  • small and compact construction, to be applied directly under the vehicle,
    also in hard-to-reach areas
  • for brake pipes with ø 4.75 mm and ø 3/16"
  • for hydraulic brake systems and clutch actuation on motor vehicles
  • suitable for steel, copper and aluminum pipes

Samas kategoorias on veel 30 toodet :